Vaporesso GEN NANO 80W Starter Kit

The Vaporesso GEN Nano Vape Kit features the lightweight GEN Nano mod which is a much more compact version of the original GEN series with a new built-in battery. The GEN Nano is powered by the new AXON chip with all new features along with the original OMNI Board chip features. The AXON chip features new modes such as the pulse, power ECO, and smart temperature control modes. The Pulse mode continuously gives you a hit throughout your puff (every 0.02 seconds) giving you even more powerful, flavorful clouds with every puff. The Power ECO mode optimizes the settings of your GEN Nano mod to maximize battery life. The Smart Temperature Control mode will automatically recognize your temperature control coil. The GEN Nano can fire up to 80 watts and supports multiple temperature control settings. The GEN Nano is now powered by a built-in 2000mAh battery that may be charged via the micro USB charging port.

The Vaporesso GTX 22 sub-ohm tank features a 3.5ml e-Liquid capacity which is easily filled from the top using the simple twist off cap. The GTX 22 tank features a simple push and pull coil replacement system for easy coil replacements. The tank features dual airflow slots that may be adjusted for maximum airflow. The GTX 22 tank is compatible with Vaporesso GTX mesh coil atomizer heads for a balance between flavor and vapor production.

Vaporesso GEN Nano Starter Kit

Check out the Vaporesso GEN NANO 80W Starter Kit, featuring a desirable 2000mAh battery, multiple firing modes, and impressive Vaporesso GTX 22 Tank. Constructed from durable zinc-alloy, the chassis of the GEN NANO houses the 2000mAh rechargeable battery. Equipped with the advanced AXON chipset at the helm, the GEN Nano delivers a multitude of firing modes, complete with temperature control options to allow users to tailor the vapor output to their liking. In addition, the GEN Nano Starter Kit comes with the Vaporesso GTX 22 Sub-Ohm Tank, offering compatibility with the Vaporesso GTX Coil Series. With plenty of coil options and resistances, the GTX 22 Sub-Ohm Tank is extremely versatile, while delivering optimal airflow control and a convenient top fill system that can refill its 3mL capacity.

AXON Chipset
Dimensions – 115mm by
Integrated 2000mAh Rechargeable Battery
Wattage Output Range: 5-80W
Voltage Output Range: 0.03-5.0ohms
VW Mode
Pulse Mode
Power ECO Mode
Smart TC Mode
DIY Mode
Zinc-Alloy Chassis Construction
Soft Touch Rubberized Coating
Nickel, Stainless Steel, and Titanium Wire Compatibility
Intuitive Firing Button
OLED Display Screen
Two Adjustment Buttons
Short Circuit Protection
Burn Protection
No Load Protection
Overtime Protection
Low Resistance Protection
Low Power Protection
Overcharge Protection
ESD Circuit Protection
Pass Through Protection
MicroUSB Port
Available in Black, Silver, Blue, Red, Green, and Purple

22mm Diameter
3mL Bubble Glass Capacity
2mL Standard Glass Capacity
Pyrex Glass Reinforcement
Top Fill System
Vaporesso GTX Coil Series
0.6ohm GTX Mesh Coil – rated for 20-30W
0.2ohm GTX Mesh Coil – rated for 45-60W
Compatible with other GTX Coils
Press-Fit Coil Installation
Dual Slotted Bottom Airflow Control Ring
Threaded 510 Connection
Available in Black or Silver 

1 Vaporesso GEN Nano Mod
1 Vaporesso GTX 22 Sub-Ohm Tank
1 0.6ohm GTX Mesh Coil
1 0.2ohm GTX Mesh Coil
1 MicroUSB Cable
1 Replacement Glass
1 User Manual
1 Warranty Card

Vaporesso Gen Nano Kit Review

Product intro and specs

The Vaporesso Gen Nano is a compact and super-lightweight edition of the Gen, one of 2019 best-selling and best-performing vape mods. It is an 80-watt internal battery box mod with a 2000 capacity and the latest edition of the AXON chipset.

Vaporesso pairs this mod with the GTX22 sub ohm tank, which has a 22 mm diameter and holds up to 3.5 mL of juice. But most importantly, it is compatible with the GTX coils, which are the coils that are used in the popular line of Target PM pod mods.

Build quality and design

The Gen Nano is a very close copy of the original in a smaller body. So, outside of size and weight differences, the only changes I see here are the orientation of the buttons and the fact that the Nano has the charge port at the side—and the absence of a battery door, obviously. What this means is that the Nano, same as its predecessor, is a surprisingly lightweight device that doesn’t sacrifice build quality.

I received the black, blue, and red editions. They all look great, with the blue and red both coming with this awesome gradient effect of the original, and the rubbery texture of the back and front panels is still a joy to touch. The button is clicky and responsive, the screen is bright and easy to read (although still black and white), and branding is till not intrusive at all.

As for the tank, Vaporesso didn’t reinvent the wheel here. It is a small sub ohm tank that comes with two glass options (3.5 mL and 2 mL), with a screw cap top fill and push fit coils. Nothing out of the ordinary, but nothing to fault them either.

The only minor issue I found is that there is a slight gap between the atomizer and the mod due to the protruding 510 platform. It doesn’t bother me at all, but some may find it annoying. Other than that, the Gen Nano excels in both build quality and design.

The Gen Nano mod

The Gen Nano measures at 68 mm x 40.3 mm x 24.3 mm, and while the corners are slightly beveled, it fits 24 mm atomizers without overhang. The mod weighs 83 grams on its own (around 140 with a full tank), and all in all, this kit is smaller and lighter than some of the pod mods I’ve recently reviewed.

The first thing I noticed when I turned the Nano in is that screen info is almost exactly the same between this and the full-size Gen—although interestingly, the Gen Nano’s screen is slightly larger. Other than that, the only difference is the “Best” rating they included on the Nano, which gives you an estimated rating for the wattage you’re supposed to use your tank at. In any case, this rating is not always accurate—in fact, it suggests using their own 0.2-ohm coils between 60-75 watts, which is much higher than the coil’s actual rating.

Navigation on the Gen Nano is pretty much the same as it was on the original Gen (minus the Super Player mode which doesn’t make much sense on an internal battery device). You can find all the info about the available modes in the review of the Gen, but here’s a rundown of basic operations:

5 clicks of the fire button to turn on and off
3 clicks of mode button to enter the menu
Use up and down to scroll the menu and mode to accept.
Use the fire button to exit the menu
3 clicks of the fire button to lock adjustment buttons (can still fire)
TCR and power adjustments are made after selecting the mode
Note that the “mode” button is the one directly below the up and down buttons (or, in this case, the left and right buttons.)

As for temperature control performance, the AXON chipset has shown to be a good performer in Anthony’s in-depth review. I expect it to perform at the same level, with the only limitation being the lower wattage cap of the device.

Finally, the original Gen had an issue where the rubbery material would absorb juice and get stained. I didn’t notice anything like that on my samples, but I suggest keeping it as dry as possible just to be safe.

The GTX 22 tank

As implied by its name, the GTX22 tank is 22 mm in diameter and can fit up to 3.5 mL of juice when used with the included bubble glass. It comes with a wide bore 510 drip tip and in order to fill it you’ll need to unscrew the top cap. I wish it had a slide fill because it can get messy. Don’t fill it up to the rim or you’ll need to wipe the external. To put the top cap back on, slightly push it down while screwing.

There are three airflow slots on the ring, and when all three are open the airflow provides an airy direct lung draw. Note that I did have some leaking from the airflow after filling it, but nothing out of the ordinary—and it is pretty damn hot here this time of the year, so that may also play a role.

The tank takes the GTX family of coils, the same coils used in the Target pod mod lines and the GTX One starter kit. I haven’t tried the One but I have heard that it’s a solid beginner kit, especially for MTL vaping with the higher resistance coils. But in any case, it’s great that the tank takes coils that are sure to be around for a while. There’s also a lot of variety here, with five prebuilt coils and an RBA head available. Plus, I’m almost certain that they’ll keep adding to the line. Replacing the coil is pretty straightforward: just unscrew the base, pull the old coil and push the new one in.

These coils are great, and not far in performance from some of the best RDL sub ohm coils. Flavor is crisp on the 0.2-ohm included coil, and the 0.6-ohm coil provides a good balance of performance and battery power. You can find more info about performance and coil life in Anthony’s reviews of the Target PM80 and the Target PM80 SE.

But let’s discuss the MTL aspect of this kit. Vaporesso included a box of 1.2-ohm regular coils in the package (there’s also a 1.2-ohm mesh option available), and they mention that it’s made for MTL vaping in their coil’s page—which is further supported by the 8-12 watt rating. So, I primed one of those, inserted it in the tank, and replaced the drip tip with one with a narrower bore.

Can the GTX 22 do MTL? Technically yes, but it is not its strong suit. If you leave the airflow open by a hair and raise the wattage to the upper limit of the coil (12 watts) it vapes similarly to the Innokin Zlide with all four holes open—which is far from my preferred kind of MTL. The throat hit is almost non-existent! I certainly wouldn’t buy it for MTL, but I’d probably use it if it were the only vape I had available. I guess the point I am trying to make is that a low wattage coil with a narrow chimney doesn’t always equal a good MTL vape. But to be fair, Vaporesso doesn’t even include this coil in the package, so I can’t really fault them for that. For what it’s worth, the 1.2-ohm coil is not bad for RDL if you really want to conserve battery life.

Battery life and charging

With five coil options and an RBA head available, battery life will vary greatly depending on the power needs of the coil you go with. I got a bit under two full tanks worth of vaping (around 6 mL) on a charge when using it with the 0.2-ohm coil at 50 watts, but this didn’t translate to a lot of vaping time at that power level. Using it with the 1.2-ohm coil I went through around the same amount of juice, but it took a lot more vaping to get there.

I timed a full charge at 75 minutes, which is rather impressive for a 2000 mAh battery—I’ve reviewed pod systems that take more time to charge. Unfortunately, the Nano charges through a mini-USB port, so no Type-C charging. I find that a bit weird, especially considering that they have used Type-C ports in some previous devices like the PM30.

Finally, I really like the fact that the screen shows battery percentage and even the remaining charging time when plugged in. The remaining time is more or less accurate, and while I am pretty sure that the level reading jumped around a bit on occasion, I got consistent battery life out of the device.

We will be happy to hear your thoughts

Leave a reply

Vape Juice Shop Online
Enable registration in settings - general