Vaporesso SWAG 2 80W Starter Kit

The Vaporesso SWAG 2 Vape Kit features the upgraded SWAG 2 mod powered by the new AXON chip with all new features along with the original OMNI Board chip features. The AXON chip features new modes such as the pulse, power ECO, and smart temperature control modes. The Pulse mode continuously gives you a hit throughout your puff (every 0.02 seconds) giving you even more powerful, flavorful clouds with every puff. The Power ECO mode optimizes the settings of your SWAG 2 mod to maximize battery life. The Smart Temperature Control mode will automatically recognize your temperature control coil. The SWAG 2 features a lightweight special formulated rubber coating which is designed to be scratch and fingerprint resistant. The SWAG 2 features a unique top battery cap design (for maximum 25mm diameter tanks) for maximum size efficiency. The SWAG 2 can fire up to 80 watts and supports multiple temperature control settings. The SWAG 2 is powered by (1) high amp 18650 battery (sold separately) which may be charged via the micro USB charging port.

Vaporesso SWAG 2 Starter Kit

Introducing the latest addition to Vaporesso’s Swag line in their upgraded Swag II. If you’re a fan of the original Swag, the Swag II will feel deliciously familiar with a nearly identical button layout and battery configuration! What sets the Swag II apart though is enough to make any Swag fan upgrade! The Swag II device has been paired with the attractive NRG PE Tank, its chipset has been updated to the fast and accurate Axon chip, and the device’s enhanced exterior features visually gorgeous designs that also happen to be smudge resistant and engineered for increased durability! Ready to get your Swag on again? Then add Vaporesso’s exceptional Swag II Starter Kit to your DirectVapor cart today!

  • AXON Chipset
  • Single High Amp 18650 Battery – Not Included
  • Wattage Output Range: 5-80W
  • Resistance Range: 0.03-5.0ohm
  • PULSE Mode
  • Zinc-Alloy Chassis Construction
  • Rubberized Coating
  • Intuitive Firing Button
  • Two Adjustment Buttons
  • 0.91″” OLED Display Screen
  • Threaded 510 Connection
  • MicroUSB Port
  • 25mm Diameter
  • 3.5mL Juice Capacity
  • Pyrex Glass Reinforcement
  • Threaded Top Fill System
  • Vaporesso GT Coil Series
  • 0.15ohm GT4 Meshed Coil – rated for 50-75W
  • 0.5ohm GT CCELL Coil – rated for 25-35W
  • Threaded Coil Installation
  • Dual Slotted Bottom Airflow Control Ring
  • 810 Delrin Drip Tip
  • Threaded 510 Connection
  • 1 x SWAG II Box Mod
  • 1 x NRG PE Tank
  • 1 x GT4 Meshed Coil
  • 1 x GT CCELL Coil
  • 4 x O-Rings
  • 1 x USB Cable
  • 1 x User Manual
  • 1 x Warranty Card

Vaporesso Swag II Review: It’s like a Miniaturized GEN!

Vaporesso have released yet another mod and this time it’s the Swag II. It sticks to nearly the same design and shape as the original Swag but now it has a rubberized coating like the GEN and also uses Vaporesso’s newest AXON chipset.

The Swag II is a single 18650 battery mod and it will fire from 5-80W. It has a 0.91” OLED display and the 510 plate will fit tanks up to 25mm in diameter. If you buy the Swag II kit you’ll also get the NRG PE tank.

Design & Build Quality: Swag II Mod

The Swag II is like a mix of the Eleaf iStick Pico and the Vaporesso GEN. It’s small and compact like the Pico and it has a battery cover that sits next to the tank. It also has the same rubber coating as the GEN, as well as the same screen & menu.

The rubber coating feels awesome. Since the Swag II is primarily made out of plastic it makes the device feel newer and more premium. It’s also one of the things that I liked the most about the GEN so I’m glad that they implemented it on the Swag II. Thanks to this plastic and rubber paint combo the Swag II remains feathery light, even with a battery installed.

At 75mm tall the Swag II is short but it has the battery cap sticking out on top of it. Because of this cap a 25mm tank is the largest that the Swag II can accommodate. Plus, the Swag II is only 25mm wide so anything larger would overhang anyway.

The threading on the battery cap is smooth as butter and it comes off or goes on easily. A single 18650 battery fits snug but not too tight and there’s no battery rattle at all. In addition, there are venting holes on the bottom of the device just in case of a battery incident.

The body of the Swag II has a slight curve on one side and, depending on the hand I use, my fingers rest right in the groove. If I use my left hand it’s more comfortable to fire with my index. Using my right hand feels better with my thumb.

There’s minimal branding on the body: a Vaporesso “V” on the bottom center of one side and “Vaporesso Swag II” on the other. It’s not too in-your-face and I like that.

The fire button on the Swag II is the same as the GEN only it’s smaller. It’s small and round with a dimple in the center and it’s placed at the front of the mod — standard placement. But the adjustment buttons are placed in an awkward position on the side of the mod, just like the original Swag.

This location isn’t too bad and I got used to it but what I can’t get used to is how they work with the menu — they’re upside down! Adjusting the wattage is fine; the up adjustment button turns the wattage up and down turns the wattage down. But once the menu is open the buttons are reversed! Up scrolls the menu down and down scrolls the menu up, I can’t get used to it! Why Vaporesso, Why!

The 0.91” display is also the same as the one on the GEN. It’s simple but it works. I think it’s bright enough when set at 5 but if you want it brighter it can be turned all the way up to 10 in the menu settings.

Features & Functions: Swag II ModSwag II Screen

The Swag II is a single 18650 mod and as such it will only fire up to 80W. It comes with lots of modes; pretty much every mode you could want, and then some!

The Swag II has: Pulse mode, Power Eco mode, Smart TC, Variable Wattage (soft, normal, hard), Temperature Control mode (SS, TI, Ni, manual), Variable Voltage, Custom Wattage Curves, Bypass and “Super Player” mode.

Pulse mode was first introduced on the GEN and it’s nearly the same as regular wattage mode. The difference is that it pulses the wattage every 0.2 seconds when you take a draw. This is supposed to make the vapor more flavorful and dense but it’s a small difference if any from wattage mode.

Power eco helps to save battery if you’re running low. The Swag II will ask you if you want to switch to Power Eco mode when the battery gets to around 40% or you can change the settings to automatically switch to Power Eco when the battery is low. Neat.

Smart TC mode automatically detects your coil material and then sets the correct TC mode. But in my testing the Swag II sometimes had trouble correctly identifying my coils. If this happens you can always use the regular Temperature Control mode and set the correct material but I think that this feature could use some tweaking.

Vaporesso Swag II Button Combinations

There’s a rectangular, dedicated menu button under the screen. Pressing it three times opens the menu. Also, this menu button is used to select options; not the fire button.

Five clicks on the fire button to turn the power ON/OFF
Three clicks on the fire button to lock the wattage
Three clicks on the middle adjustment button to enter the menu
DIY menu is where you’ll find “regular” modes (Variable Wattage, TC, Bypass)


If you pick up the Swag II kit then you’ll also get the NRG PE tank. It has a 25mm diameter and fits perfectly on the Swag II. It’s a nice tank with knurling on the airflow control ring and “Vaporesso” printed directly below the fill cap. The drip tip is wide-bore, 510 delrin drip tip. It’s good but it looks plain.

Two coils come with the NRG PE: a 0.15ohm GT4 mesh coil rated for 50-75W and a 0.5ohm GT CCELL coil rated for 25-35W. The GT4 is a dual mesh coil and it’s pretty big. The CCELL coil is ceramic and it’s a similarly large coil.

The NRG PE doesn’t come with a bubble glass and ships with a straight glass tube. It holds 3.5ml of eliquid. It’s a small tank size and not the largest capacity tank by any means. Due to this, I sometimes found myself refilling the tank twice a day so I had to keep my ejuice close.

The top cap swivels open with a push and the fill port is surrounded by a silicone guard. It’s a standard size fill port that will fit all bottle types. The top cap seals the fill port well enough when closed that I haven’t had any leaking issues.

The NRG PE has two wide airflow slots and the ring is on a stopper. It’s easy to turn but firm enough that it stays in place wherever it’s set.The threading on the tank is smooth and the build quality is good.

NRG PE Performance

I used the NRG PE with the Swag II and the results I got are just okay. The 0.15ohm GT4 coil says it’s best at 60-70W and I found that accurate. I got the best out of the coil at 65W. Flavor is good but not great. It’s not a coil that I mind using but there are better ones out there.

The 0.5ohm CCELL coil vaped best right at 30W but it’s just decent and I’ve had much better. I liked vaping this tank with the airflow closed up to around half for a denser and more restricted draw.

My verdict for this tank is that unless this is your first kit, it’s probably not worth it. You probably have a better tank already if you’ve purchased that tank outside of a kit. But the NRG PE isn’t a bad tank and they’re not bad coils. Maybe I’m just being too picky.

Swag II Performance

When it comes to performance the Swag II is like a mini GEN. It’s just as good to vape with in power mode but because it only fires up to 80W, it’s better suited to coils that don’t require a lot of power.

The soft, normal and hard wattage modes are excellent. The draw is consistent and the Swag II feels like it’s outputting the correct wattage. A draw at 65W feels like it should which is strong and warm. It outputs power instantly too with zero delay. Really good wattage mode performance.

Pulse mode isn’t much different from wattage mode but lately I’ve found myself using it more. The draw feels a bit smoother and maybe the flavor is a bit better as well. I can’t say with 100% certainty.

Oddly enough Temperature Control mode doesn’t seem to work as well as it did on the GEN. I thought that they use the same chip but maybe I’m mistaken. The Swag II just feels underpowered and doesn’t provide the draw that it should in TC mode. It’s weak and inconsistent at best. Not a good TC showing.

Vaporesso have done a great job with the Swag II. Temperature control performance is lacking but everything else is excellent. It’s a nice mod that makes a great companion for taking on the go without taking up too much space.

What are your thoughts on the Swag II? Leave a comment below!

We will be happy to hear your thoughts

Leave a reply

Vape Juice Shop Online
Enable registration in settings - general